PH MV EC O2 Molecular Biology

CONSORT P903

Detector pH / mV / Temperature / Ion-selective microprocessor, complete with integrated graphic display

  • Automatic pH range readings: -2.000 ... 16,000 pH mV: ± 0...2000,0 mV Ion-selective: 10-11 ... 10+1 Direct concentration and temperature increase methods: 0...+100.0 °C
  • pH resolution: 0.001 pH mV: 0.1 mV Temperature: 0.1 ° C
  • pH / mV / Ion Inputs. : BNC, 1012 Ohm + Differential Temperature Measurements: 1; 2 X banana Pt 1000/Pt 100
  • pH/mV/Ion Accuracy. : 0.1% of reading
  • Automatic or manual temperature compensation -30 ... +130 ° C
  • Programmable automatic or manual pH calibration over time: 1 ... 5 points up to 9 standards + 5 definable ISO-pH: 6 ... 8 pH SLOPE: 80% ... 120 mV: 1 Ion-selective point: 2 ... 19 points; 5 temperature calibration curves: ± 10 ° C
  • High resolution LCD graphic display 124 x 64 pixels for the display of titration curves
  • Manual / automatic storage in the time of 7200 readings with date and time for pH, mV and temperature
  • GLP standard software with the electrode calibration history
  • Stability Indicator
  • Battery charge indication percentage
  • Control at ignition
  • "Hold display" function
  • Manual selection of the resolution
  • Analog output: 0...2 V
  • Bi-directional RS232C output for printer and / or external PC
  • Numerical identification of the sample and instrument
  • Personal access code to the data and methods
  • Data acquisition and transmission
  • IP65 waterproof box
  • NiCd batteries for current jobs with no indication of charging power
  • Power supply 210 ... 250 VAC, 50/60 Hz
  • Dimensions and weight: 250 x 120 x 50 mm / 600 g

PORTABLE or INDUSTRIAL MODELS FOR COMBINATION READINGS pH / EC / O2 ARE AVAILABLE

K911

Computerised conductimeter with dual full power of integrated graphics display and 4-pole conductimetry cell

  • Readings of automatic´┐╝ range conductivity: 0 ... 200 mS / cm Resistivity: 0 ... 20 MW.cm Salinity: 0 ... 100 mg/l Temperature: 0...+100.0 °C
  • Conductivity Resolution: 0,01 µS/cm Resistivity: 10 W.cm Salinity: 0.01 mg / l Temperature: 0.1 ° C
  • Conductivity inputs: 1 DIN-8 (4-electrode) at high temperature resolution: 1 DIN-8 (4-electrode) with very high resolution
  • Accuracy 0.5% of reading
  • Temperature compensation. Automatic or manual 0 ... 100 ° C
  • Automatic or manual temperature calibration with 3 predefined standards + 3 definable by user: ± 10 ° C Correction of constant cell temperature: 0.3 to 1.3 cm-1 ± 30%, auto calibration coefficient temp. : NaCl curve temperature reference: 20 or 25 ° C Solution cal. : 1413 mS / cm - 12.88 mS / cm - 111.8 mS / cm + 3 that can be personalised by the user
  • High resolution LCD graphic display 124 x 64 pixels for the display of titration curves
  • GLP standard software with calibration history of the cell
  • Signal stability indication and "hold display" function
  • Self-diagnosis of ignition, possibility of electrode efficiency control
  • Programmable analog output 0 ... 2 V
  • RS232C output for printer and / or external PC
  • Manual or automatic storage with a time of 7200 readings with date and time for conductivity, resistivity or salinity and temperature
  • Watertight IP65 safekeeping
  • NiCd batteries for current jobs with no indication of charging power
  • 4 constant electrode conductometry cell K = 1cm-1 complete with Pt1000 thermometric probe
  • Power supply 210 ... 250 VAC, 50/60 Hz
  • Dimensions and weight: 250 x 120 x 50 mm / 600 g

PORTABLE or INDUSTRIAL MODELS FOR COMBINATION READINGS pH / EC / O2 ARE AVAILABLE

Oops...

There was an error pulling content for this page
To add content from your site manually click here

To remove the page go to the Manage Pages section on the left.

Share by: